GEKA Semipaxy 1000x400 mm B&R 15

•  
  Reference number 1069-905

  Operation Hours not applicable

• Vendor

  HESSE + CO Maschinenfabrik GesmbH
  Industriezentrum NÖ-Süd, Straße 4 Objekt 8
  2351 Wiener Neudorf

  Austria

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  5 Sides Machining centres (Vert/Hor)

• Manufacturer

  GEKA

• Technical data

  neu

  ca. 10 Wochen ab Auftrags

  Spanien

  24100 €

  494.05 €

  1000 mm

  400 mm

  12 m/min

  0,2 mm

  0,1 mm

  300 kg

• Description

  The Semi Paxy table is a positioning unit with CNC control unit which may be factory fitted onto any GEKA punching machine with a 500 mm or larger throat. THE ASSEMBLY CONSISTS OF: * Mounting plate. * Table assembly with “X” and “Y” axis driven by servo motors. * B&R Power Panel 500 PC based 15” touch screen control * Each axis “X” and “Y” has servo motors with built encoder for precise measurement. * Electric cabinet THE WORK PROCESS IS AS FOLLOWS: * The position of the holes to be punched is programmed either in absolute or incremental dimensions. * When the control is started up, the guide stops are positioned for first hole. * The material to be punched is placed against guide stops and the punching pedal is activated, the ram then cycles. * After the punch has returned to the pre-set clearance height, the table guide stops move to the next programmed position. * Repeat this sequence until all holes are punched. B&R PC BASED 15” TOUCH SCREEN CONTROL MAIN FEATURES: * * B&R Power Panel 500 * Integrated keyboard * Windows embedded operating system * 15” colour touch screen WXGA resolution * Compact Flash Memory. * USB front port * Ethernet port * Easy and user friendly interface * Programming is made through Line Pro software developed by Geka * Importing of dxf/dstv files * Network connectivity * Remote assistance via the internet * Run, design, jog, configuration and alarm modes ELECTRIC CABINET * Electric cabinet containing power and control equipment for the axis positioning and control of the machine * Includes Allen-Bradley Guarmaster® safety relays * Electric cabinet is mounted inside Hydracrop’s or Puma’s frame. If machine is retrofitted, the electric cabinet is mounted out of the machine’s frame. * Standard input power is 400 V - 50 Hz - 3 phases. In case different input requirement is needed, let us know LINE PRO MAIN FEATURES: * It is a visual and a very easy to use application with graphic representations. * It shows the operator the image of the piece that is being designed. * All the process of the part (from designing to manufacturing) can be done and controlled directly from the Positioning Control. * Importing of dxf and dstv files available according to designing specifications of the software. * It is easier to make changes on holes that have been already designed and the operator can easily identify any mistake on the part; as he is watching physically on the screen all the steps of the process of manufacturing of the part. * Line Pro can be installed in a PC for later on sending the file via the network or with a USB stick to the machine * Other X- and Y- ranges are also available, please ask for an offer.
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used