MAS Masturn 70
Reference number 6607563
Manufacture Year 2025
Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
LathesType of Machine
CNC-lathes (2-axes)Manufacturer
MASDescription
CNC lathe
Type: Masturn 70
Manufacturer: MAS
Year: 2025
Control: Heidenhain MP620
Max turning length: 2000 mm
Turning diameter over bed: 820 mm
Turning diameter over support:530 mm
Main spindle power: 28 kW
Max spindle speed:!1800 rpm
Total power input: 50 kW
Driven tools
Tailstock
Chip conveyor
Dimensions:
Length: 4000 mm
Width: 1810 mm
Height: 1885 mm
Weight: 5300 kg
Complete overhaul 11/2024, condition of new machine, under power
Repair schedule:
- GEOMETRY
Regrinding of the X and Z axes
Scratching of headstock directions
Scratching the directions of the tail
Sticking the turcite on the support for guiding the X axis and scratching it
Casting of the sliding mass on the slide for guiding the Z axis
Sticking the turcite on the Z-axis attachments and scratching it
Alignment of the alignment of the tool head with respect to the spindle
Aligning the alignment of the houses for storing the Z ball screw
- MOVEMENT SCREWS AND BEARINGS
Installation of new ball screws, bearings and belts and pulleys
- REPLACEMENT OF THE SPINDLE UNIT
- REPAIR OF MAIN DRIVE WITH GEARBOX
Replacement of bearings and sealing shaft rings in the gearbox and hl. engine, new belts hl.
drive
- LUBRICATION
Replacement of lubrication hoses, tubes and dispensers
- OTHER PARTS
wheels
This includes repair of sliding doors, replacement of bearings in sliding wheels, or new ones
1
repair of sheet metal parts
replacement of hoses for cooling and lubrication
replacement of wipers
replacement of glasses
Repositioning of the tailstock and replacement of the wiper for pinoles
New cooling pump
New energy chain of the Z axis
New covering of the machine, new sliding door + covering of the right side
The control panel is guided separately, it is not attached to the Z-axis slide, similar to the Masturn machine
MT820i
Linked chip conveyor
- Tool head
Retrofit of Duplomatic tool heads
New tool ring VDI50
Driven tool holders
- WASH ALL PARTS
- DYEING
Combination of colors according to the customer. Recommended combination according to the new Masturn.
All parts sandblasted
Firing color used
- ELECTRICAL PART
Completely new electric of the machine
HEIDENHAIN MP620 control system
One year warranty
Find more here - https://www.ucymachines.com/
Contact us at - sales@ucymachines.com
State
Used
More products from UCY Industrial GmbH
