ZMM LS 600 M

•  
  Reference number 1069-2118

  Operation Hours not applicable

• Vendor

  HESSE + CO Maschinenfabrik GesmbH
  Industriezentrum NÖ-Süd, Straße 4 Objekt 8
  2351 Wiener Neudorf

  Austria

  

• Main Category

  Metal working machines

• Category

  Lathes

• Type of Machine

  CNC-lathes (2-axes)

• Manufacturer

  ZMM

• Technical data

  neu

  ca. 4 Monate ab Auftragse

  Bulgarien

  71100 €

  1429.11 €

  600 mm

  1500 mm

  300 mm

  80 mm

  400 mm

  400 mm

  8

  90 M

  3

  20 - 100, 80 - 400, 400 - U/Min

  max. 8 m/min

  max. 8 m/min

  290 mm

  90 mm

  5 MK

  225 mm

  11 kW

  3,5 / 22 kW/Nm

  1,75 / 11 kW/Nm

  120 Nm

  1250 daN

  1050 daN

• Description

  Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenient in a specific work environment. The intuitive menu facilitates the transition to next screens and operations. Well visualized and structured cyclic operations,threads and steps. Possibility to set up the feeds, threads, etc. both mechanically and digitally (via the display). The manual, automatic and combined mode allows more precise operation compared to universal lathe. Easy transition from manual to automatic operation mode. ACCESSORIES: Siemens motor with Siemens Inverter (3 gear steps) CNC control Schneider Magelis Quick change tool post Amestra Multifix Typ C inkl. 4 Halter (3x Rechteck, 1 Rund) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm, max. 2500 r/min Spindle dead center Ball screw spindles for longitudinal and cross axes Coolant equipment Full length rear splash guard Spindle protection Splash guard for the chuck Levelling bols and shims Quick release tailstock Machine lamp Operating manual Machine according to "CE“ FURTHER TURNING LENGTHS: 1000 mm € 69.800,00 2000 mm € 72.600,00 3000 mm € 75.400,00 4000 mm € 78.400,00 5000 mm € 81.300,00
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used