MÜLLER PMLE 250 X 2000 R-HK

•  
  Reference number 50719

  Manufacture Year 2008

  Operation Hours not applicable

• Vendor

  ProdEq Trading GmbH
  Reckholder 1
  9527 Niederhelfenschwil

  Switzerland

  

• Main Category

  Metal working machines

• Category

  Presses with mechanical driving

• Type of Machine

  H-Frame Crank Presses

• Manufacturer

  MÜLLER

• Description

  CONTROLS
    electronic controls SIEMENS S7 300
  
  PRESS DESIGN
    drive system: eccentric / crank
    number of suspensions: 2
    table cushion: no
    quick die change system: yes
  
  PRESS FORCES
    total force (nominal): 250 to
  
  PRESS TABLE
    table surface (left-right): 2000 mm
    table surface (front-back): 1100 mm
    height above floor level: 1105 mm
    opening in bed (left-right): 1700 mm
    opening in bed (front-back): 305 mm
  
  SLIDE
    table surface (left-right): 2080 mm
    table surface (front-back): 1000 mm
    stroke rate (max.): 120 /min
  
  SLIDE (MECHAN. PRESS)
    slide adjustment: 120 mm
    stroke adjustment: yes
    stroke min.: 20 mm
    stroke max.: 180 mm
  
  TOOL ASSEMBLY DIMENSIONS
    shut height (stroke down, adjustment up), BDC: 500 mm
    distance between columns (H-frame): 2055 mm
    passline opening (free passage in side columns): 810 mm
  
  DECOILER
    sheet width max.: 300 mm
    coil weight max.: 2 to
    max. diameter of coil: 2000 mm
    mandrel expansion range up to: 550 mm
  
  LEVELLER UNIT
    sheet width max.: 310 mm
    number of leveller rolls: 7
    diameter of leveller rolls: 80 mm
  
  STRIP-FEEDER
    feeder type: roll feeder
    sheet width max.: 200 mm
    sheet thickness max.: 4 mm
    speed max.: 120 m/min
  
  ELECTRICAL SPECIFICATIONS
    total power consumption: 95 kW
    mains voltage: 400 V
    mains frequency: 50 Hz
  
  DIMENSIONS / WEIGHTS
    space requirements -left/right-: 4800 mm
    space requirements -front/back-: 2750 mm
    total height: 5400 mm
    total weight approx.: 57000 kg
  
  ATTACHMENTS (PRESSES)
    decoiler: yes
    leveller unit: yes
    European CE standards: yes
  
  
  Machine hours: 20,391 h (operating hours)
  Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm
  
  Equipment:
  - External connecting rods for high tilt stability
  - Hydraulic overload protection
  - Press force monitoring
  - Temperature sensors at the bearing points
  - ABS AHM 2.0T decoiler (1999)
  - PBK RSD 8/6/300 straightener (2010)
  - Loop belt control
  - LW-060-02 roller feed (2008)
  - Advanced central lubrication system
  - Press force monitoring
  - Temperature sensors at the bearing points
  - Hydraulic tool clamps
  - Spring-loaded machine feet
  
  - Optional: Bilz air springs for an additional €7,000
  
  

• State

  Used