ERFURT RDOH 2-400

•  
  Reference number 43648

  Manufacture Year 1997

  Operation Hours not applicable

• Vendor

  ProdEq Trading GmbH
  Reckholder 1
  9527 Niederhelfenschwil

  Switzerland

  

• Main Category

  Metal working machines

• Category

  Presses with mechanical driving

• Type of Machine

  H-Frame Multiple-Die Presses

• Manufacturer

  ERFURT

• Description

  CONTROLS
    PLC SIEMENS S5
  
  PRESS DESIGN
    drive system: eccentric / crank
    frame design: H-frame, monoblock
    openings in uprights: yes
    number of suspensions: 2
    number of slide actions: 1
    table cushion: yes
    quick die change system: yes
    feedstock transport direction: left to right
  
  PRESS FORCES
    total force (nominal): 400 to
    nominal work capacity: 32 kNm
  
  PRESS TABLE
    table surface (left-right): 2600 mm
    table surface (front-back): 990 mm
    thickness of bolster plate: 200 mm
    height above floor level: 800 mm
    opening in bed (left-right): 2250 mm
    opening in bed (front-back): 280 mm
  
  SLIDE
    slide force: 400 to
    table surface (left-right): 2600 mm
    table surface (front-back): 990 mm
    stroke: 210 mm
    stroke rate (max.): 90 /min
  
  SLIDE (MECHAN. PRESS)
    slide adjustment: 150 mm
    stroke rate (min.): 25 /min
    stroke rate (max.): 90 /min
    hydraulic overload protection: yes
    main drive power: 72 kW
  
  SLIDE EJECTOR / CUSHION
    number of ejectors: 13
    nominal force: 3.7 to
    stroke: 89 mm
  
  TOOL ASSEMBLY DIMENSIONS
    shut height (stroke down, adjustment up), BDC: 705 mm
    distance between columns (H-frame): 2900 mm
    passline opening (free passage in side columns): 900 mm
    free passage between side columns (height): 545 mm
  
  COIL CHAIR
    coil weight max.: 3 to
    stroke: 550 mm
  
  DECOILER
    design: single reel, traversable
    sheet width max.: 400 mm
    sheet width (min): 30 mm
    coil weight max.: 3 to
    max. diameter of coil: 1500 mm
    mandrel expansion range from: 460 mm
    mandrel expansion range up to: 530 mm
  
  LEVELLER UNIT
    sheet width max.: 400 mm
    sheet thickness max.: 5 mm
    sheet thickness min.: 0.5 mm
    number of leveller rolls: 9
    diameter of leveller rolls: 50 mm
    number of infeed-/outfeed rolls: 2
    diameter of feed rolls: 150 mm
    loop controls: yes
  
  STRIP-FEEDER
    feeder type: roll feeder
    roll diameter: 120 mm
    pilot release system: yes
  
  TRANSFER SYSTEM
    distance between tools, stroke X max.: 300 mm
    distance between tools, stroke X min.: 90 mm
    Inner width clamping rails closed max.: 340 mm
  
  ELECTRICAL SPECIFICATIONS
    mains voltage: 400 V
    mains frequency: 50 Hz
  
  DIMENSIONS / WEIGHTS
    height above floor level: 6300 mm
    total weight approx.: 73000 kg
  
  
  without Coil line
  zig-zag feed 2-axis transfer unit Press force monitoring BRANKAMP cushion mounting bar in table with exchangeable pneumatic cushion units MAYFRAN scrap conveyor (cross conveyor) optional (separate offer): MAYFRAN longitudinal conveyor and scrap loading station with swiveling outlet. Condition: Machine serviced annually, good overall condition. next safety check 11/2024

• State

  Used