DMV 145 (Reference-Nr. 051398)

•  
  Reference number 051398

  Manufacture Year 2025

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining Centers (Vertical)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Vertical-Machining centre Stealth Design; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-42000/1-42000/1-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Working area 1
  Longitudinal	1450 mm
  Cross	700 mm
  Vertical	550 mm

• Specification

  
  

  Table	Table surface 1760 x 750 mm
  	Maximum load (table centre) 2000 Kg
  	Slot width 14 mm
  	Number of Slots 7
  	Distance between T-Slots 100 mm
  Spindle speed 20.000 rpm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Preperation for NC-Devider EA510 indirect	Preparation for NC-Divider EA510 with indirect measuring system
  Tool magazine 30 pockets HSK-A63	Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazine
  Internal coolant supply package 40 bar / 600 l	Internal coolant supply package 40 bar / 600 l contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 40 Bar // 580 psi Tank capacity: 600l // 158,5 gallon Chip conveyor, Bed flushing, Chip flushing working area, Cabin roof double ca
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Infrared measuring probe PP60 optical ISO 40	Infrared touch Probe for ISO 40 make Renishaw PP 60 optical (OMP 60) Tool taper suitable for the spindle
  Door drive for working area door	Door drive for working area door opening and closing via electrical door drive, incl. safety sensor for accident prevention, start opening and closing via button at the control panel. Remark: Not possible for automation!
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  One free M-function	One free M-function M20 potential-free on contact inside electrical cabinet
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine

• State

  Used