DMU 40 (Reference-Nr. 040818)

•  
  Reference number 040818

  Manufacture Year 2024

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Universal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	550 mm
  Vertical	420 mm
  Cross	450 mm
  Technical Data
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min

• Specification

  
  

  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	Drive power (40% DC) 35 kW
  	Torque (100% DC) 86 Nm
  	Torque (40% DC) 130 Nm
  	Clamping System HSK-A 63
  	Spindle taper HSK-A 63
  	Speed range - 20000 rpm
  NC swivel rotary table	Swivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation
  Tool clamping for HSK-A63	Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)
  Tool magazine 60 pockets	Tool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loading
  Chip removal package with cabin roof	Swarf removal package chip conveyor Coolant - air-blast changeover Swarf conveyor, scraper type with cleaned slot screen Spray gun for swarf removal Bed flushing, cabin roof
  Renishaw Blue Power Probe Kit	Renishaw Blue Power Probe Kit Infrared measuring probe PP 60 optical Laser tool measuring Renishaw NC4 blue Install on console beside working table, Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with
  3D Quick SET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Oil- and emulsion mist separator mechanical	Oil and emulsion mist separator mechanical filter system 1100 m³/h (only available with option cabin roof)
  Internal coolant supply 40bar/600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon incl. rotary joint in spindle, double cartridge filter 50µm for internal coolant Rotating clear-view window (differently from standard)
  Chip flushing for working area	Chip flushing for working area rinsing line on the right side panel, backside of machine bed, cabin left and right activated or deactivate by M function's (only in combination with internal coolant supply, not with 20 bar ICS)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air
  EROWA Automation Interface PH 150	Automation interface PH 150 for EROWA zero point clamping system consisting of: Interface (Profibus) via M65 Working table with 4-channel rotary joint Automatic loading door Control of EROWA (MTS / UPC) Zero-point clamping system Automation Software Inter
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine

• State

  Used