DMU 80 P duoBLOCK (Reference-Nr. 040744)

•  
  Reference number 040744

  Manufacture Year 2022

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Universal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	800 mm
  Cross	1050 mm
  Vertical	850 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Tool changer
  Application	Universal
  Type of magazine	Wheel
  Tool changer plane	horizontal
  Type of gripper	Double gripper
  Number of tools	123

• Specification

  
  

  Coolant supply ICS	Coolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoretic
  Chip removal	Chip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in
  NC rotary table	Type of Measuring system Direct measuring system
  	Table surface 900 x 700 mm
  	Centre bore 50H6 mm
  	Maximum load (table centre) 1500 Kg
  	Slot width 14 mm
  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 11
  	Drive power (40% DC) 35 kW
  	Torque (100% DC) 86 Nm
  	Torque (40% DC) 130 Nm
  	Speed range - 15000 rpm
  	Spindle taper HSK-A 63
  	Clamping System HSK-A 63
  Cabine	Full protection cabin
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. taper cleaning, adaptation working spindle, tool changer and tool magazine)
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Stop block + 3-point-support	Stop block + 3-point-support Design according to DECKEL MAHO Standard
  Tool magazine, wheel, 123 pockets	Tool magazine wheel magazine (2 wheels) with 123 tool pockets
  Operation panel for loading station tool magazine	Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60 SK 40 or optionally chosen spindle taper
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of the measuring unit in a protected housing, Tool length and diameter measurement in horizontal/ vertical position
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Tool breakage control mechanical	Tool breakage control mechanical version
  Sensor package i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  rotoLENS - milling head camera	rotoLENS - Camera with rotating lens integrated in the milling head Visualization via CELOS and HDMI Digital zoom and recording function
  rotoLENS - working envelope camera	rotoLENS - Camera with rotating lens integrated in the machine roof Visualization via CELOS (delayed) and HDMI (real time) Digital zoom and recording function
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Control cabinet lighting with power outlet	Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  1 Additional set of documents in paper form	1 additional set of documents: operating and programming instructions in paper form
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Special equipment	L probe package 1 (Renishaw infrared) with calibration device For pulling measurement (Z+) of webs and grooves. With Siemens control only in kinematic basic position and not in connection with Cycle 800. Calibration device for direct installation on the N

• State

  Used