PFAUTER RS 9 K

•  
  Reference number 1058-24179

  Manufacture Year 1974

  Operation Hours not applicable

• Vendor

  EMUK GmbH Werkzeugmaschinen
  Siemensstraße 24a
  76316 Malsch

  Germany

  

• Main Category

  Metal working machines

• Category

  Gear Cutting Machines

• Type of Machine

  Gear milling machines

• Sort of Machine

  Vertical gear hobbing machines

• Manufacturer

  PFAUTER

• Technical data

  min. module

  1

  max. module

  10

  voltage

  220/380 V

  frequency

  50 Hz

  total power requirement

  14 kW

  weight of the machine ca.

  4,7 t

  dimensions of the machine ca.

  3,5 x 2,3 x 1,8 m

• Description

  1) Working area:
  
  - Largest module to be milled: 10
  - Largest travelling distance of the table slide: 695 mm
  - Largest centre distance: 870 mm
  - Largest workpiece diameter dk2: 300 mm
  - Smallest number of teeth that can be milled z2min
  Machine with 2-speed indexing gear: 4
  Machine with 1-speed indexing gear: 8
  
  2) Dimensions:
  
  - Bore of dividing head spindle: 145/141 mm
  - Centre distance between milling cutter and workpiece
  min. 50 mm
  max. : 170 mm
  - Largest clampable hobbing cutter
  Length b1: 170 mm
  Diameter dk1: 150 mm
  - Diameter of cutter arbours (standard accessories): 32, 40 mm
  - Drive taper for milling arbours: 5 Morse taper
  - Taper for tailstock centre: 4 Morse tapers
  - Largest tangential path i+: 60 mm
  
  3) Speeds and feed ranges:
  
  - Milling cutter speeds: 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355 rpm
  - Axial feed: 0.25 .... 4 mm/WU
  - Radial feed: 0.175 .... 0.995 mm/WU
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used